GE GPS5WW - Manual

ijtfc i.orci!..=rrìer^ O !ro:c,,isiriu
Appliances
Installation Instructions
GPS5CC, G PS 5 WW
Dishwasher Side Panel Kit
The Side Panel Kit is used to enclose o built-in dishwasher
when a fully supported countertop and cobinet cavity do not
have an end panel present. The Side Panel Kit is not designed
to support the countertop or cobinets, so it is important that
they be fully supported prior to installing the kit. The kit may be
used for either a left-hand or a right-hand opening.
BEFORE YOU BEGIN
- Read these instructions
completely and carefully.
IMPORTANT
- Save these instructions for local
inspector's use.
IMPORTANT
- OBSERVE ALL GOVERNING CODES
AND ORDINANCES.
Instoliation of this panel kit requires basic mechanical ond
carpentry skills. Wear your safety equipment when using tools
and handling parts for your protection. Proper installation is
the responsibility of the installer.
PARTS SUPPLIED:
□ End panel
□ Toekick panel
□ Panel support bracket
□ 2 - #8 X 3/4" wood screws
□ 4 - #10 X
1" wood screws
n 4 -1/4" X 3/8" machine screws
□ 4 -1/4" nuts
□ 4 -1/4" lock washers
n 2 - 3/16" X 3“ toggle bolt screws
□ 2 - 3/16" toggles
□ 6 - 3/16" flat washers
□ Installation Instructions
End Panel
Toekick
l\ Panel
(#8i 3/4"
Wood Screws
Lock
Washer
1/4" Nut
Panel Support
Bracket
(# 10 ) 1 "
Wood Screws
D
1/4"X 3/8"
Machine Screws
Toggle Bolt Screw
Flat Washer
NOT INCLUDED:
2 - Lag bolts of appropriate size for use when the floor
is ceramic tile, quarry tile or similar material.
TOOLS
YOU WILL NEED:
□ Phillips head screwdriver
□ Drill and assorted drill bits
□ 7/16" socket, box-end or open-end wrench
n Measuring tape
□ Carpenters square
□ Safety glosses
□ Gloves
Phillips Head
Screwdriver
Measuring Tape
Wrench
Carpenters
Square
Safety Glasses
Gloves