GE 165 D3080P027 - Manual (Page 4)

Mow io ooorsiii^ '«/Olir rli«liw$ifihpr
---------------------------------------- y ^ ---------- --------------------------------------- --
STEP 1. Load your dishwasher
with dishes, silverware, pots,
pans, bowls, etc. according to
instnictions on pages
8 and 9.
STEP 2, Add detergent to the
detergent dispenser. Make sure
Tnrlir'Cli'/Tr* Telili ic OT71 h
UlVy XAlVXXVytlLWA J--^ACJ.A AkJ UV WA A
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. (See page
6 .)
STEP 3: Select Drvinn Ootion,
HEATED
DRYING
=1F
1
=i ENERGY
i SAVER
Amrinn r»n frtr filct Hrvina
VXXJTAJIA^ JIAWMVWA ASXA A«Ak/C> ^
ENERGY SAVER. Turns the
Ar\nr\cr hpatRT nfftn sflVi» finftrav
----------- ------------------- -------------------------------- c j .
Dishes dry naturally over a longer
period such as overnight.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
drying time.
Use of this option reduces the
electrical energy used by this
model approximately 9 % for
MrirmaJ /^
va I a
Estimated yearly savings, depending
on your local electrical rates, are:
1 Electric Rate
(per Kwh) $ .05 $ .08 $ .11
BStilTiatcd
Yearly Savings $6.25 $10.00 $13.75
STEP 4. Select the Cycle and start
dishwasher.
If your dishwasher drains into a
food waste disposer, operate the
disposer until It
IS empty before
starting the dishwasher. (See Cycle
selection hints on next page.)
To obtain the benefits of a complete
cycle, be careful that you do not
turn the dial any further than
necessary to start the dishwasher.
® For NORMAL WASH cycle:
LIGHT WASH ®
DRYING
a= Latch the door.
K ClriMiHr fn-rn r^AfAlA TnHlAQtnr C/. Aji LIAXAJt WAV' AAAVJ.AV'IAtV^JL
to ON position to start the cycle.
® For LIGHT WASH cycle:
a. Be sure door is unlatched.
b. Slowly turn Cycle Indicator Dial
to LIGHT WASH position.
c. Latch door to start the cycle.
For RINSE ONLY cycle;
LIGHT W ASH
RINSE
ONLY
nnviMri
a. Be sure door is unlatched.
b. Select ENERGY SAVER
drying option.
c. Slowly turn Cycle Indicator Dial
to RINSE ONLY position.
d. Latch the door to start the cycle.