Cabletron Systems 6H258-17 - Manual (Page 31)

Installation 3-1
3
Installation
This chapter covers the following items:
• Unpacking the SmartSwitch ( Section 3.1 )
• Installing Options ( Section 3.2 )
• Installing the SmartSwitch into the 6C105 Chassis ( Section 3.3 )
• Connecting to the Network ( Section 3.4 )
• Completing the Installation ( Section 3.5 )
3.1 UNPACKING THE SMARTSWITCH
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in Table 3-1 .
Only qualified personnel should install the SmartSwitch.
NOTE
Read the Release Notes shipped with the device to check for any exceptions to the
supported features and operation documented in this guide.
Table 3-1 Contents of SmartSwitch Shipping Container
Item Quantity
SmartSwitch 1
Manual Accessory Kit 1