Before you call for service – GE PGP953DETWW User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before you call for service^
XT'N Troubleshooting Tips
J Save time and money! Review the charts on these pages
first and you may not need to call for service.
\
Problem
Possible Causes
What To Do
Burners have yellow or
yellow-tipped flames
The combustion quality of
burner flames needs to be
determined visually.
• Use the illustrations below to determine if your burner
flames are normal. If burner flames look like A, call for
service. Normal burner flames should look like
B or C,
depending on the type of gas you use. With LP gas, some
yellow tipping on outer cones is normal.
lllllllllJniilinnHlHlHIl
A-Yellow flames B-Yellow tips C-Soft blue flames
Call for service
on outer cones Normal for natural
Normal for LP gas gas
Control knobs
will not turn
Knob isn't pushed down.
• To turn from the
OFF position, push the knob down
and then turn.
Burners do
not light
Plug on cooktop is not
completely inserted in the
electrical outlet.
• Make sure electrical plug is plugged into a live, properly
grounded outlet.
Gas supply not connected
or turned on.
• See the Installation Instructions that came with your
cooktop.
A fuse in your home may be
blown or the circuit breaker
tripped.
• Replace the fuse or reset the circuit breaker.
Burner parts not replaced
correctly.
• See the Care and cleaning of the cooktop section.
The electrodes under the
burners are soiled.
• See the Care and cleaning of the cooktop section.
The white ceramic electrodes
are not securely seated under
the burners.
• See the Care and cleaning of the cooktop section.
Cooktop is locked.
• Unlock the cooktop. See the Using the cooktop
burners section.
The igniter hole (on some
models) is plugged.
• See the Care and cleaning of the cooktop section.
Ticking sound of
igniter persists after
burner lights
Control knob is still
in the
LiTE position.
• Turn the knob out of the
LiTE position to the desired
setting.
• Turn the burner off and relight. If ticking is still
present, call for service.
Burner flames very
large or yellow
Improper air to gas ratio.
• If cooktop is connected to LP gas, check all steps
in the Installation Instructions that came with
your cooktop.
Cooktop makes sound
when a control knob
The cooktop is locked
(on some models).
• Turn the control lock knob to
UNLOCKED.
is turned on
12