GE 51135 GE Indoor Outlet Receiver with Keychain Remote Smart Remote Plus Compatible User Manual
A warning, User's manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Enclosed you will find
• (1) Key Chain Remote Control
• ID Indoor Outlet Adapter
Indoor Lighted Entry Kit
Outlet Adapter with Key Chain
Remate Cantrol
User's Manual
The GE Smart Remote Plus advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver-the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
c®us
LISTED
A WARNING
Risk of electric shock
• Keep childpen away
• Use indoors only
• Do not use in wet locations
Risk of fire
• Do notexceedelectiical ratings
The following GE Smart Remote Plus transmitters (sold separately) can control your receiver:
Key Cho/n Remote
RFlOOrXPS
O
Wall Mount Control
RFÎ02TXPS
Whole-Home Control
RF2000KINPS
Mot/on-Sensi*ng Contro/
RF6Î3TX
The transmitters above can also control the following GE Smart Remote Plus receivers (sold separotelyl:
■o-
Indoa Outlet
RFÎOORXPS
B
Outdoor Outfet
RFI06/?XPS
Socket/Adopter
/?FI04PXPS
Wall Switch
RF102RXPS
IM PORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
Expanding your system
The GE Smart Remate Plus devices operate an any of 8 user-settable channels. The channels are
easy to set/ adjust - with the simple turn of a knob. Set up your GE SmartHome™ by purchasing as
many transmitters and receivers as you need. The following table is just ane example of how you can
configure your Smart Remote Plus ^stem:
Area
CH Transmitters
Receivers
Bedroom
1 Bedside - Wall Mount Control
Entrance-Wall Mount Cantrol
(2) Bedside Lamps - (2) Socket Adapters
Comer Torchiere - Indoor Outlet Adapter
Overhead Ught Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room 2 Coffee Table - Timer/Controller
Entrance-Wall Mount Cantrol
(2) End Table Lamps- (2) Socket Adapters
Overhead Ught Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3
Window Santa - Indoor Outlet Adapter
Ughted Poinsettia - Indoor Outlet Adapter
Basement 4 Entrance - Wall Maunt Control(4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures- (2) Indoor Outlet Adapters
Garage
5 Entrance - Wall Mount Control
(2) Fluorescent Fixtures-(2) Outdoor OutletAdapters
Overhead Light Fixture - Wall Svitch
Outdcor
6 Foyer-Wall Mount Control
Car Keys- Key Chain Remote
Entry Light-Wall Svitch
Coo* Lantern - Wall Switch
7
Christmas Lights- Outdcor Outlet Adapter
Yard Santa-Outdoor Outlet Adapter
Kitchen
S
Entrance-Wall Mount ControlCoffee Maker- Indoa Outlet Adapter
GE is a trademark of the General Electric Company
and is used under license to
Jasco Products Company LLC,
311NW. 122nd Street,
Oklahoma City, OK 73114
wwwjascoproducts.com.
90 DAY LIMITED WARRANTY: Jasco
Products Company warrants this product
to be free from manufacturing defects for
0
period of ninety days from the original
dote of consumer purchase. This warranty
is limited to the repair or replacement of
this product only and does not extend to
consequential or incidental damage to
other products that may be used with this
unit. Thiswononty is in lieu of all other
wononties express or implied. Some
states do not allow limitatbns on how long
an implied warranty lasts or permit the
exclusion or limitation of incidental or
consequential damages, so the above
limitations may not apply to you. This
wananly gives you specific rights, and you
may also have other rights which vary
from state to state. If unit should prove
defective within the warranty period,
return prepaid with dated proof of
purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK. 73114
Operating Instructions
FOR INDOOR USE ONLY
1. Remove the small tab on the back of unit labeled HOUSE CODE
using a small screwdriver.
2. Set the HOUSE CODE to any one of the following settings:
ON
1 2
A B C D
NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. The
transmitters WILL NOT cantrol the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on /off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Replace the HOUSE CODE tab.
4. Set the CHAN NEL by using knob on front as shown.
NOTE: If you set your Indoor Outlet Adapter to CHAN NEL 1,
the unit can be controlled using any transmitter set to CHANNEL L If you set your Indoor Outlet Adapter
to CHAN NEL 2, the unit can be cantrolled using any transmitter set to CHANNEL 2... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
©
HOUSE CODE and CHAN NEL settings.
5. Plug Indoor Outlet Adapter into a powered, grounded 125VAC outlet.
6. Plug the lamp / appliance you wish to control into the Indoor Outlet Adapter os shown.
The following are examples of devices you can control with your Indoor Outlet Adapter:
COFFEEMAKER
LAMP
FAN
TORCRIE№ CHRISTMAS ME SURGE PROJECTOR
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.
DO NOT CONNECT/ DISCONNEQ DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.
Operating Instructions - Key Chain Remote Control
1. Remove the battery compartment cover.
2. Set the HOUSE CODE to any one of the following settings:
3. Replace the battery compartment cover.
4. Set the CHAN NEL by using the knob on front as shown.
NOTE: If you set your Key Chain Remote Control to CHANNEL 1,
the unit can control any receiver set to CHAN NEL 1. If you set your Key Chain Remate Control
to CHAN NEL 2, the unit can control any receiver set to CHANNEL 2... and so on.
5. Use the toggle button to activate the Key Chain Remote Control (ON/OFF operation). Make
sure
to press firmly and for a minimum af 1 second for best results. An indicator lights RED when a
signal is sent.
6. Using any of the receivers set to the same CHAN N EL and HOUSE CODE, test the installation by using
the ON and OFF buttons
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at vwvw.GESmartHome.com
to download application notes, manuals and to find out more about the GE SmartHome™ product line!
Specifications
Key Chain Remote Control
Battery Type ___________________________ Use ONLY A23 (12V) Alkaline
NOTE: The functional range will decrease as the battery wears out so make sure to replace the
battery every 6 months for best results.
Indoor Outlet Adapter
FOR INDOOR USE ONLy
DONOTEXCEEDELECTRICAL RATINGS
Electrical Rating ____________________________________ 120V, 60Hz
Maximum Resistive Load ________________________________ 1200W
Maximum Tungsten Load ________________________________ 600W
Maximum Motor Load __________________________________ 1/3HP
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and recever.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
L This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
B