Char-Broil PATIO BISTRO 11601558 - Manual (Page 4)

1/4-20 Nuts
(4 each)
4
ASSEMBLY GUIDE
Part Qty
.
A1 – Tank Retainer Ring 1
A2 – Cart Base 1
A3 – Tank Retainer Bolt 1
A4 – Front Leg Set 1
1/4x20-1/2"
Step 1
Step 2
(qty 2)
GRILL CART Assembly
A6 – Wheels 2
1/4-20 Nut
A1
A3
A2
Assemble Tank Retainer Ring (A1) to the Cart Base (A2)
by aligning studs into corresponding holes. Secure with 4
each, 1/4-20 nuts using a small adjustable wrench, not
supplied.
Thread the Tank Retainer Bolt (A3) into the Tank
Retainer Ring(A1)
1/4-20 Screws
(4 each)
Wheel
Retaining
Clip install after
placing wheel on
the axle.
(qty 4)
screw A5 – Rear Leg Set 1
(qty 4)
Wheel Retaining
Clip
A4
A5
A2
A6 A7
Axle Bolt
A7 Hubcap 2 –
3/8-16 Nut
(qty 2)
Axle Nut
3/8-16
Position wheel
as shown
Attach Front Leg Set (A4) to the Cart Base (A2) using 2 1/4-20 screws. Attach Rear Leg Set (A5) to
the Cart Base (A2) in the same manner, using 2 1/4-20 screws.
Attach 2 Axle Bolts to the Rear Leg Set (A5), thread a 3/8-16 nut as shown and tighten securely using
a small adjustable wrench.
Slide a Wheel (A6) over an Axle Bolt and secure using a Wheel Retaining Clip. Repeat for other side.
Position and Snap into place the Wheel Hubcaps (A7).
After cart assembly, if
your cart does not sit
level, use these screws to
adjust the cart.
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!
Axle Bolt
(qty 2)