4signal description, 1 graphic signal description – Compaq COM Express Extension User Manual
Page 12
4 Signal Description
Copyright © COM Express™ Extension
Specification Rev 013
12
4
Signal Description
4.1
Graphic Signal Description
Based on the different available graphic interfaces offered by the different chipsets from silicon
vendors including Intel, ATI, VIA, etc., there is a need for optional assignment in addition to the ones
already defined by PICMG in the COM.0 specification. These will allow for ease when integrating
upcoming new graphic interfaces while still assuring compatibility of COM Express™ compliant
modules and carrier boards.
Graphic signals are defined on Row C and Row D.
The following table describes the signal uses up on the required graphic interface.
4.1.1
Table – Graphic Signal Description - Row C for Pin-out Type 2
Row C
Definition
PCIE x 16
SDVO
TMDS(DVI)/HDMI/DVO
Display Port
Pin No.
Pin Name
C52
PEG_RX0+
SDVO_TVCLK+
HDMI_TVCLKIN
C53
PEG_RX0-
SDVO_TVCLK-
HDMI_TVCLKIN#
C54
TYPE0#
TYPE0#
TYPE0#
TYPE0#
C55
PEG_RX1+
SDVOB_INT+
C56
PEG_RX1-
SDVOB_INT-
C57
TYPE1#
TYPE1#
TYPE1#
TYPE1#
C58
PEG_RX2+
SDVO_FLDSTALL+
TMDS_DDC_DAT
DPB_AUX
C59
PEG_RX2-
SDVO_FLDSTALL-
TMDS_DDC_CLK
DPB_AUXB
C60
GND (FIXED)
GND (FIXED)
GND (FIXED)
GND (FIXED)
C61
PEG_RX3+
TMDS_HPD
DPB_HPD
C62
PEG_RX3-
C63
RSVD
RSVD
RSVD
RSVD
C64
RSVD
RSVD
RSVD
RSVD
C65
PEG_RX4+
C66
PEG_RX4-
C67
RSVD
RSVD
RSVD
RSVD
C68
PEG_RX5+
SDVOC_INT+
C69
PEG_RX5-
SDVOC_INT-
C70
GND (FIXED)
GND (FIXED)
GND (FIXED)
GND (FIXED)
C71
PEG_RX6+
TMDS_2_DDC_DAT
DPC_AUX
C72
PEG_RX6-
TMDS_2_DDC_CLK
DPC_AUXB
C73
SDVO_DATA
SDVO_DATA
C74
PEG_RX7+
TMDS_2_HPD
DPC_HPD
C75
PEG_RX7-
C76
GND
GND
GND
C77
RSVD
RSVD
RSVD