Layering two tones, Playing with different tones, Other effect settings – Casio PX500L User Manual

Page 10

E-8

Playing with Different Tones

Other Effect Settings

You can select from among four reverb effects and four
chorus effects by pressing the keyboard keys shown
below.

While holding down the CONTROL
button, press one of the keyboard keys
shown above.

▲

1: Room 2

0: Room 1

2: Hall 1

3: Hall 2

1: Chorus 2

0: Chorus 1

2: Chorus 3

3: Chorus 4

1 Reverb Effect Keys

2 Chorus Effect Keys

Layering Two Tones

Use the following procedure to layer to two tones, so
they sound at the same time.

PREPARATION

• If you plan to use a variation tone, perform the procedure

on page E-6 to select the variation tone for the applicable
TONE button(s) before starting this procedure.

While holding down the TONE button of
one of the tones you want to use (the base
tone), press the TONE button of the other
tone (the layered tone).

Example: Press GRAND PIANO 2 button and

STRINGS button at the same time.

• This causes the indicator lamp of the base tone

to light, and the layered tone to flash.

• If the base tone (the one you pressed first) is a

variation tone, the indicator lamp above the
VARIATION button will light.

• The tones are now layered.

After you are finished using the layered
tones, press one of the TONE buttons again
to unlayer them.

NOTE

• Note that you cannot layer the main tone and

variation tone assigned to the same TONE button.

GRAND PIANO 2

STRINGS

414A-E-010A