Crestron electronic CHV-TSTATRF - Manual (Page 35)

Crestron CHV-TSTATRF infiNET™ Thermostat
NOTE: It is not recommended to add the CHV-TSTATRF directly.
Instead, add one of the available “modules” listed underneath it as shown
below.
Locating the C2N-MNETGW in the Device Library
Locating the CHV-TSTATRF in the Device Library
• The system tree of the control system displays the device in the appropriate
slot with a default MNET ID as shown in the following illustration.
C2Net Device, Slot 9
• Additional CHV-TSTATRF devices are assigned different MNET ID
numbers as they are added.
• If necessary, double click a device to open the “Device Settings” window
and change the MNET ID, as shown in the following figure.
Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 31