Crestron electronic CHV-TSTATRF - Manual (Page 22)

infiNET™ Thermostat Crestron CHV-TSTATRF
network. Verify that the MNET ID for the infiNET device is set to match
the MNET ID specified in the program. Check the D3 Pro, SystemBuilder
or SIMPL Windows program to ensure that a CHV-TSTATRF has been
added at the proper MNET-ID. Refer to “Programming with Crestron D3
Pro or SystemBuilder” on page 30 or “Programming with SIMPL
Windows” which starts on page 30.
• Four brief blinks every eight seconds: No communication with gateway
established. Refer to “Troubleshooting” which starts on page 35 for details.
18 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490A