English 26, Adjusting the filter frequency, Filter frequency – Clarion DXZ856MP User Manual

Page 26: Filter adjustment

English

DXZ856MP

280-8224-00

Sound Adjustment

Adjusting the filter frequency

Filter frequency

You can set a filter frequency value best suited
for your speakers.

* This item can be adjusted only when “SUB-

WOOFER” is set to “ON”.

• The factory default setting for FILTER is

“THROUGH”.

Filter adjustment

● SUB-W LPF (Subwoofer Low-Pass Filter)

adjustment

This filter cuts the signals above the selected
frequency value.
Each touch switches the frequency value as
follows:

THROUGH

➜ 50Hz ➜ 80Hz ➜ 120Hz ➜

THROUGH...

Select the frequency that suits your subwoofer.
Set to “THROUGH” if you use powered
subwoofers with built-in low-pass filters.

1. Press the [SOUND] button.

2. Touch [FILTER].

3. Touch

on the right of the display to

select the frequency value.
• Select from THROUGH, 50Hz, 80Hz, or

120Hz.

4. Press the [SOUND] button to return to the

original mode.

+DXZ856MP_01-24-Eng.p65

1/27/05, 7:12 PM