Starting your washer, Select water 2. temperatures, Load sizes and water levels – Whirlpool LA77OOXP User Manual

Page 4: Select a 1. load size select water 2. temperatures

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting
your washer:

1. Measure and add detergent

2. Place sorted load in washer
3 Start washer.

Select a

1. LOAD SIZE

Select WATER

2. TEMPERATURES

Turn the knob to point at a setting
that describes the size ot load you
want to wash.
Set the knob anywhere on or

between EX SMALL (a few items)

and LARGE (a full load).

DO NOT LOAD

ABOVE CLOTHES GUARD

NOTE: Use the LARGE water level

for best permanent press results.

• Seleot wash and rinse water tem

peratures by pushing a button.

• This drawing shows a warm wash

(top temperature) and cold rinse
(bottom temperature) selection.

Recommended wash temperatures
can be found in your "Laundry Guide.

IMPORTANT: Use warm water

with the PER’T PRESS or KNITS/

GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely
in the water. Too big a load or too
little water can cause wear or

tearing of load items.

'Approximate

fill with load.

DO NOT

OVERLOAD WASHER.

LARGE (17.3 gals./65.5 L)*

(14.7 gals./55.7 L)*

(12,1 gals./45.8 L)*

EX SMALL (9,5 gals./36.0 L)*