Other operating instructions, For a rinse and spin, For a soak or pre-wash – Whirlpool LA77OOXP User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Other operating instructions
For a rinse and spin
You may need an extra rinse and
spin for heavily soiled loads which
need more detergent. (Extra de
tergent can require an extra rinse.)
• Push Control Knob in.
• Turn clockwise to any • on the dial.
See above drawing.
• Pull Control Knob out.
• The washer will fill to selected
level; agitate 2 minutes; drain
and spin.
For agitation and spin speeds in each cycle, see pages 6-9.
Your washer can be set to drain
and spin out water
• Push Control Knob in.
• Turn clockwise to the bar just before
OFF in any cycle. See above
drawing.
• Pull Control Knob out.
• The washer will drain and spin.
For a soak or pre-wash
For best results, use warm water
tor soaking or pre-washing stained
laundry. Hot water can set stains.
• Use recommended amount of
detergent or pre-soak product.
• Push Control Knob in.
• Turn clockwise to point at a number
in the SOAK Cycle...use the 6-minutes
mark for a pre-wash.*
• Pull Control Knob out to start washer.
• When the cycle Is over, add de
tergent for the next selected wash
cycle. The SOAK Cycle should
always be followed by a Wash
Cycle.
Important: See additional care
information on page 7 of your
“Laundry Guide.’’
*To start soak or pre-wash with agitation, the Cycle Control Knob
must point to a number in the SOAK Cycle.
10