beautypg.com

Whirlpool 2184589 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

U S I N G Y O U R R E F R I G E R A T O R

To remove the shelf:

1. Remove all items from the shelf.
2. Hold back of shelf with one hand.

3. Lift front of shelf to 45° angle.
4. Lower shelf slightly to release shelf from upper

channel of track. Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both hands
when removing shelf.

Upper channel

Hold with both hands and lift front to 45° angle.

To remove shelf track:

1. Lift both sides of track slightly.

2. Pull track straight out.

Hold both sides and lift up and out.

To replace shelf track:

1. Guide track hooks into the shelf support slots on the

back wall of the cabinet.
NOTE: Make sure both track hooks are in slots and
that the slots are parallel to each other.

2. Push track backward and down.
3. Check that track is completely seated in the shelf

supports.

Make sure
both sets
of hooks
are in
support
siots.

Sheif

• support

To reinstall shelf:

1. Hold shelf at front and back.

2. Tilt front of shelf up to a 45° angle to track.
3. Insert both rear shelf slides into upper channel

of track.

4. Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely in

the track before letting go of shelf.

Upper channel

of track

Insert rear shelf
slides into
upper channel
of track.