beautypg.com

Removing the base grille, Changing the light bulbs, Awarning – Whirlpool 2184589 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

U S I N G Y O U R R E F R I G E R A T O R

Removing the base grille

To remove the base grille:

1. Open the refrigerator door.

2. Grasp the grille with both hands.

3. Push down on the top edge of the grille to release

the top clips.

4. Tilt the grille toward you to release the bottom clips.
5. Pull grille away from the refrigerator.

NOTE: Do not remove the Tech Sheet fastened behind

the grille.

To replace the base grille:

1. Line up the edges of the grille with the outside edges

of the cabinet.

2. Roll the grille toward you.
3. Place lower clips in the openings in the metal panel.
4. Roll the grille toward the cabinet until the top clips

snap into place.

5. Close the refrigerator door.

See cleaning instructions for defrost pan and

condenser coils on page 17.

Condenser coils

Defrost pan

Clips

Changing the light bulbs

AWARNING

Electrical Shock Hazard

Unplug the refrigerator or disconnect the

electricity leading to it at the main power
supply before removing a light bulb shield.

Failure to do so could result in death or

electrical shock.

To change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind Control Panel to remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.

15