Removing the drop-in door trim, Removing the snap-on door trim, Adjusting the door bins – Whirlpool 2184589 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Removing the drop-in door trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each end.
To replace the trim piece:
1. Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim piece straight down until it stops.
3. Repiace items on the shelf.
Removing the snap-on door trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end.
3. Lift trim piece straight out.
To replace the trim piece:
1. Line up ends of the trim piece with the button on the
door liner wall.
2. Push trim piece straight back until it snaps securely
into place.
3. Replace items on the shelf.
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Support button