Recessed area instructions, If you need assistance, Aivhirlp Page 5
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recessed area
instructions...
This washer may be installed in a
recessed area or closet.
The installation spacing is in inches and is
minimum allowable. Additional spacing
should be considered for ease of
installation and servicing.
If closet door is installed, the minimum air
openings in top and bottom are required,
Louvered doors with air openings in top
and bottom are acceptable.
Companion appliance spacing should
be considered.
If you need
assistance...
Call your dealer or local authorized
service company.
When you oall, you will need the washer
model number and serial number. Both
numbers are on the serial/rating plate
located under the washer lid and on the
top of fhe washer.
Closet door
48 sq. in.
(310 sq. cm)
24 sq. in.
(155 sq. cm)
14" max.
(35.6 cm
max.)
3"
(7.6 cm)
3"
(7.6 cm)
0
"
0
"
(0 cm)
(0 cm)
Additional clearances for wall, door
and floor moldings may be required.
Front view
(door not shown)
1" min.
(2.5 cm min.)
Side view
Front view
Minimum installation spacing
AiVhirlp / JL CORPORATION Part No. 3358968 © 1992 Whirlpool Corporation Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022 Printed in U.S.A,