Operating your washer – Whirlpool 8LSR5233EZ0 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATING YOUR WASHER
5. Turn the Load Size selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• The Load Size selector has 3 load size
settings: Small/Quick Wash, Medium,
and Large.
• To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
6. (OPTIONAL STEP) If desired, set the
Extra Rinse selector to On to add an
additional rinse and spin to the end
of the wash cycle.
7. Select a wash temperature with the
Wash Temperature selector. The
selections are color-coordinated with
the cycles on the Cycle Control Knob
so you can select a water temperature
that matches the type of fabric and
soils being washed. See page 8.
• Three wash temperatures are
available: Hot, Warm, and Cold.
All rinses are cold.
Cold
Delicate
MadhtmSbi
Colora Ihtt Bleed LlngeiW Knlla
Wash Temperature
ALL RINSES COLD
8. Push in the Cycle Control Knob and turn
it clockwise to the color-coordinated
wash cycle you want. See page 8.