Troubleshooting, Common laundry problems, Troubieshooting – Whirlpool 8LSR5233EZ0 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following
iist for common iaundry probiems and the next page for common washer problems. If you
need further assistance, see page 22.
Common laundry problems
PROBLEM
CAUSE
Brown, yellow
stains
• Chlorine staining
• Iron in water heater or pipes; iron and manganese in water
Dye transfer
• Improper sorting
• Load not immediately removed from washer after end of cycle
Gray whites,
dingy colors
• Improper sorting
• Water temperature too iow
• Not enough detergent
• Using soap in very hard water (use detergent in hard water)
Greasy looking
spots
• Fabric softener poured directiy on ciothes
• Not enough detergent.
Lint
• Improper sorting
• Paper or tissue in pockets
• Pilling being mistaken for iint
• Not enough detergent
Load too wet
after spin
• Coid rinses
• Cycle stopped before spinning is compiete
Shrinking
• Fabric type (some knits stretch during manufacturing -
iaundering returns fabric to original size)
• Care label directions not foliowed
Snags, rips,
and hoies
• Items damaged before washing
• Misuse of chiorine bleach (do not pour directly on clothes);
dispenser not used
• Sharp items not removed from pockets; fasteners not fastened
Stiff, rough
fabrics
• Using soap in very hard water (use detergent in hard water)
• Not enough detergent
• Line drying
Twisting/
Tangling
• Overloading
• Clothes wrapped around agitator
Wrinkling
• Overloading (leave more room for permanent press and knits)
• Load not immediately removed from washer after cycle
• Cycle selection incorrect
Yeliow areas
(from body oils)
• Water temperature too low
• Not enough detergent
20