Using your refrigerator, Setting the control, The freezer tray – Whirlpool EL13SC User Manual
Page 5: Setting the controls the freezer tray
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using your refrigerator
LIGHT SWITCH
Setting the control...
The control for the refrigerator temperature is in
the refrigerator. When the refrigerator is plugged in
and the Run Switch is moved to RUN.
temperature
CONTROL
Give
the
refrigerator
time
to
cooi
down
compieteiy before adding food. (This may take
several hours.)
This setting should be about right for normal
household refrigerator usage.
The control will be set about right when milk or
juice is as cold as you like. In hot weather or if the
door is opened often, turn the control to a higher
number to keep the ternperature you Ii ke. If the mi I k
or juice is too cold or refrigerator items start to
freeze, turn the control to a lower number or adjust
the freezer tray damper. Wait 24 hours after an
adjustment
is
made
before
further
change
is
made to the controls.
m
•
Set the Thermostat Control to 3.
The freezer tray...
The freezer tray is located under the freezer
compartment.
The damper at the rear of the freezer tray helps
control
the
refrigerator
temperature
for
warm
weather operation. The damper can be adjusted
for
proper
cooling
and
defrosting
of
the
refrigerator.
To adjust the damper:
1. Pull out the freezer tray.
2.
Lift out the damper from the rear of the tray.
3.
Slide damper into the desired position.
NOTE: “B,C,D” positions provide fine cooling
adjustments to best meet your cooling needs in
warm weather.
C -
D -
E -(FULL Open)
COOLING AND DEFROSTING.