Starting your dryer, Position select, Selector switch 2. cycle and time – Whirlpool LT4905XM User Manual
Page 11: Push the, Start button, To stop and 4. restart the dryer, Selector switch, Cycle, Time, Restart the dryer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your dryer
Before starting your dryer, be sure laundry is sorted and loaded
properly (see your "Laundry Guide"]. Be sure the door is tightly closed.
Position
Select
1.
SELECTOR SWITCH
2.
CYCLE
and
TIME
Move Selector Switch to DRYER
position. Dryer will not operate
when switch is in WASHER position.
Turn the Control Knob either way to
point to the time setting you want in
the cycle you want.
Push the
3.
START Button
The dryer will start tumbling when
you push the START Button.
To stop and
4.
restart the dryer
To stop, open the door (or turn the
Control Knob to OFF).
To restart, close the door and push
the START button.
The Cycle Control Knob should point to OFF when the dryer is not in use.
11