Whirlpool LA6300XP - Manual (Page 4)

Starting your washer
Before starting
your washer:
1 Measure and add detergent
2 Place sorted load in washer
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATLRES
• Turn the knob to point at a setting
that describes the size of load you
want to wash
• Set the knob anywhere on or
between EX SMALL (a few items)
and LARGE (a full load).
DO NOT LOAD
ABOVE CLOTHES GUARD
NOTC: Use the LARGE water level
for best permanent press results.
Match the wash water temperature
to the type of fabrics and soils being
washed.
Recommended wash femperatures
can be found in your "Laundry Guide”
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm wafer.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
•Approximate
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.3gals./65.5L)*
- (14.7 gals./55.7 L)*
- (12.1 gals./45.8 L)*
EX SMALL (9.5 gals./36.0 L)*