Liquid bleach disperlser, Liquid fabric softener dispenser, Cleaning the lint filter – Whirlpool LA6300XP User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Liquid bleach disperLser
Always measure bleach. Do not
guess Never use more than 1 cup
(250 mL] for a full load. Use less with
lower water level settings. Follow
directions on bottle tor safe use. Use
a cup with a pouring spout to avoid
spilling
1. Load the washer first
2. Pour measured bleach carefully
into dispenser DO NOT let bleach
splash, drip or run down into the
washer basket Undiluted bleach
will damage any fabric it touches.
3. Start the washer. Bleach will be
diluted automatically during the
wash part of the cycle
For more information on bleaching, see 'Laundry Guide" page 11.
Liquid fabric softener dispenser
4. Dilute fabric softener with hot
water. Add enough hot water to fill
the dispenser up to the opening.
5. Start the washer. Diluted liquid fab
ric softener will be added to the
load during the deep rinse portion
of the cycle.
NOTE: Do not stop the washer
during this time. If you do. the
softener will mix with the remaining
soapy wash water. This will cause
1. Add detergent and load to the
stains. Do not put detergent in the
Posket
liquid fabric softener dispenser.
2. Add liquid fabric softener to
6. It dispenser needs cleaning, flush
the dispenser using the amount
vvifh hot water. NOTE: Do not wash
recommended on the bottle
clothes with dispenser removed.
3. Avoid dripping or spilling any fab
ric softener on the load
Cleaning the lint filter
Clean filter after every load for best
filtering results. Note: The load type
will vary the amount of lint build-up.
To clean:
• Lift off the agitator barrel.
• Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter is not removable.
• Replace the agitator barrel and
snap into place.