Lint screen, Lint removal, Cleaning should be done only by a qualified person – Whirlpool ELECTRIC LE5795XM User Manual
Page 9: Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lint screen
Clean the lint screen before each load. A screen blocked by lint can
Increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
O
WARNING: DO NOT run the
dryer with the lint screen
loose, damaged or missing.
Doing so can cause over
heating, can damage fabrics and
can be a FIRE HAZARD.
ROLL the lint off the screen
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
Cleaning should be done only by a qualified person.
WARNING:
All PI • Avoid electrical shock
A
hazard - unplug power
^
^
supply cord or turn off
electrical power.
• Avoid injury or damage - do not
put hands inside cabinet.
• Make sure dryer is cool.
1. Remove back panel (electric)
or lower access panel (gas).
2. Avoid damaging wires,
thermostats, funnel or Igniter.
3. Remove lint from shaded area -
see a rt - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.