Set temperature 2. selector, Push the, Start button – Whirlpool ELECTRIC LE5795XM User Manual
Page 5: Changing a setting, Select a 1.cycle set temperature 2. selector, Push the 3. start button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select a
1.CYCLE
Set TEMPERATURE
2. SELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
Push the
3. START Button
Turn the Temperature Selector to the
needed drying temperature.
To stop and restart
the dryer
The dryerwill start tumbling when
you push the START Button.
Changing a setting
The setting can be changed atany
time by turning the Control Knob to a
new setting.
To stop the dryer, open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
select cycle, if necessary, and push
START.
The Cycle Control Knob should point to OFF when the dryer is not in use.
5