Mixed loads, Drying times, Lint signal – Whirlpool ELECTRIC LE5795XM User Manual
Page 8: Mixed loads drying times
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mixed loads
Drying times
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested forthe lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
To reduce wrinkling, take the load
from dryer as soon as tumbling stops.
This is important for permanent press,
knits and synthetic fdbrics.
Drying times will vary depending on:
• amount of moisture in the clothes.
• type and weight ofthe fabric.
• size of the load.
• room temperature around the
dryer.
• temperature of the wash rinse
water.
• amount of lint in the lint screen.
• dryertemperature selection.
See page 6 in your"Dryer Guide"
for more information.
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone) signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on page 9.