Loading your dryer, Lint screen – Whirlpool 3LE5710XK User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading your
Dryer
For best drying results and energy
savings, sort dryer loads carefully.
Sort loads according to the type
of fabric and weight. For exannple:
• Dn/ heavy fabrics (denims, towels,
cottons) separately from light fabrics
(permanent press, synthetics)
• Separate lint givers (towels, sweat
shirts, etc.) from lint takers (synthetics,
blends, permanent press),
• Keep dark colors and light colors
separate.
• Keep colorfast items away from non-
colorfast fabrics.
Allow room for items to tumble
freely. The load will dry faster with fewer
wrinkles.
When drying permanent press,
dry smoller-than-normal loads for the
best wrinkle removal.
Use a mesh bag to hold small
items such as baby socks.
Read the Dryer Guide tor more
hints on sorting and loading
Lint Screen
"^he lint screen is under the hd on
too of *he dryer.
Clean
tne fmr screen before each
icoa A screen thats blocked by lint
can cause longer drying times.
CAUTION: Do not operate
the dryer with the lint screen
removed or not securely in
place as it may cause over
heating, possible damage
to fabrics and dryer parts or
create a fire hazard.
To remove the screen, open the
lid and pull the screen straight out. Roll
the lint off the screen with your fingers,
DO NOT rinse the screen or wash
it. Wet lint is hard to remove
When replacing the screen, push
it firmly into place. Close the lid