beautypg.com

Adjusting the refrigerator shelves, To remove the shelves, Removing the crispers and cover – Whirlpool 8ET14GK User Manual

Page 9: To remove the cover

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Adjusting the refrigerator shelves

Adjust the refrigerator shelves to match the
way you use your refrigerator.

To remove the shelves:

1. Remove items from the shelf.

2. Slide shelf straight out to the stop.

3. Lift back of shelf over stop.

4. Slide shelf out the rest of the way.

To replace the shelves:

1. Slide back of shelf into shelf track in wall

of cabinet.

2. Guide front of shelf into shelf track.

3. Slide shelf in all the way.

Removing the crispers and cover

To remove the crispers:

1. Slide crispers straight out to the stop.

2. Lift the front.

3. Slide out the rest of the way.
4. Replace in reverse order.

To remove the cover:

1. Lift cover front and remove the cover

support.

2. Lift cover up and slide out.

To replace the cover:

1. Fit cover tabs into lowest cabinet slots

and push in. Lower the front retainers into
place.

2. Insert cover support (with the long tab

toward the front) into the groove on the

underside of the cover.

NOTE: If the support needs adjustment,

turn base clockwise to raise or counter­
clockwise to lower.

Lift cover front,

then the back.

This manual is related to the following products: