Using the ice cube trays, To remove ice, Changing the light bulb – Whirlpool 8ET14GK User Manual
Page 11: Warning, Electrical shock hazard, To change the refrigerator iight, Dooim inmrrm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the ice cube trays
If you don’t use the cubes, they may shrink.
The moving cold air starts a slow evapora
tion. The longer you store cubes, the smaller
they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
Dooim
inmrrm
Changing the light bulb
^WARNING
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the refrigera
tor at the main power supply. Turning
the Temperature Control to the OFF
position does not disconnect the
refrigerator from the power supply.
Failure to do so could result in electri
cal shock or personal injury.
To change the refrigerator iight:
1. Disconnect refrigerator from power
supply.
2. Reach behind the Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size, wattage and shape.
10