beautypg.com

Installing it properly, Leveling it – Whirlpool 8ET14GK User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Installing it properly

1. Allow 7.5 cm (3 inches) between overhead

cabinets and refrigerator top.

2. Allow at least 2.5 cm (1 inch) between the

refrigerator condenser on the back and the

wall.

3. Allow 1.25 cm

(V

2

inch) on each side of the

refrigerator for ease of installation.

4. If the hinge side of the refrigerator is to be

against a wall, you might want to leave extra
space so the door can be opened wider.

5. Level your refrigerator.

Leveling it

Your refrigerator has 2 front, adjustable

rollers to prevent rocking on uneven floors.

To adjust rollers:

1. Roll refrigerator into position.

2. Adjust rollers by turning the leveling

screws, located at the front of the base.
• Turn clockwise to raise.

• Turn counterclockwise to lower.

NOTE: Rollers are adjusted correctly

when the refrigerator no longer rocks
when the doors are opened or closed.

3. Repeat this procedure whenever the

refrigerator is moved.

NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.

Use a screw­

driver to adjust

Roller

Lower

Leveling screw

Raise

This manual is related to the following products: