Whirlpool Freezer - Manual (Page 12)

Party chiller
(select models)
The party chiller keeps beverages and other items cooler
than the rest of the fresh food section. A cold air inlet allows air
from the freezer section to pass into the beverage chiller.
The party chiller control is located on the left wall of the fresh
food compartment. The control adjusts the amount of cold air
allowed in to the beverage chiller. For a cooler temperature in
the party chiller slide the control down.
To Remove:
• First remove the pick off shelf to the left of the party chiller.
• Firmly hold each side of beverage chiller, lift up and away from
door liner.
To Install:
• Reverse above procedure.
Crisper Drawers
The Crisper Drawers provide a higher humidity environment
for fresh fruit and vegetable storage.
Controls
The Crisper Controls regulate the amount of humidity in the
crisper drawer. Slide the control toward the FRUIT setting for
produce with outer skins. Slide the control toward the
VEGETABLES setting for leafy produce.
VEGETABLES FRUIT
HUMIDITY CONTROLLED
To Remove:
• Pull drawer out to full extension. Tilt up front of drawer and
pull straight out.
To Install:
• Insert drawer into frame rails and push back intoplace.
Note
For best results, keep the crisper drawers tightly closed.
Temperature-Controlled Drawer
The Temperature controlled drawer is a full-width drawer
with adjustable temperature control. This drawer can be used
for large party trays, deli items, beverages or miscellaneous
items and features a divider to organize the drawer into sections
if desired.
There is a temperature control which adjusts the amount of cold
air allowed into the drawer. The control is located on the right
side of the drawer, under the lid.
Set the control to the higher setting | to provide a normal
refrigerator temperature. Set the drawer on the lower setting
^ when a temperature colder than the main refrigerator
compartment is desired. Use the coldest setting when storing
meats.
Coldest
Chiller
Control
Cold
203