The surface burner grates, The removable cooktop, The surface burners – Whirlpool FGP210V User Manual
Page 7: Caring for your range, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Caring For Your Range
^WARNING
Burn, Electrical Shock, Fire And
Explosion Hazard
■
Make sure all controls are OFF
and the range is cool before
cleaning.
■
Do not obstruct the flow of
combustion and ventilation air.
Failure to follow these guidelines
could result in burns, electrical
shock, fire or explosion.
The surface burner grates
1. Make sure all surface burners are
off and the surrounding parts are
cool,
2. Lift off the surface burner grates.
3. Wash the grates with warm, soapy
water or in a dishwasher. Use a
nonabrasive, plastic scrubbing pad
for cooked-on foods. Rinse and dry
weU.
4. Replace burners grates.
The removable cooktop
The surface burners
1. Remove surface burner grates.
2. Lift front of cooktop enough to clear
front of range. Grasp cool burner
openings. Lift and pull forward.
3. Wipe surface under cooktop with
sponge and warm, soapy water. Use
a soap-filled plastic scrubbing pad
on heavily soiled areas,
4. To replace cooktop, lower front of
cooktop while placing into rear
support brackets. Avoid hitting the
control panel.
A
warning
Personal Injury And Product
Damage Hazard
■
Do not try to clean under the
cooktop without removing the
cooktop first. The cooktop could
accidentally fall and injure you.
■
Do not drop the cooktop. Damage
can result to the finish and the
cooktop frame.
1. Remove the cooktop, following the
instructions above.
2. Wipe off surface burners with
warm, soapy water and a sp onge
after each use. To remove cooked-
on food, soak the burners in a
vinegar and water solution J or 20
30 minutes. Scrub with a plastic
scrubbing pad.
3. If ports are clogged, clean v\ith
a
straight pin.
DO NOT enlarge or
distort the ports. DO NOT use a
toothpick to clean the ports.
Typical surface burner flame
4. Occasionally check the burner
flames for proper size and shape as
shown above. If flames lift off ports,
are yellow, or are noisy when
turned off, you may need to clean
the burners (see above), or tall a
qualified technician for adjustment.
5. Replace cooktop.
Page 7