Using your ovens, Setting the controls, Baking in either oven – Whirlpool RB47OPXL User Manual
Page 4: Adjusting the oven temperature controls, To lower the, To raise the, Adjusting the oven temperature oontrols, Setting the olock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using your ovens
Automatic
MEALTIMER Clock
Stop Time
Knob
Manual Oven
Light Switch
Adjustable Lower Oven
Temperature Control
Adjustable Upper Oven
Temperature Control
Minute Timer
Upper Oven
Selector
SETTING THE CONTROLS
BAKING IN EITHER OVEN
1. Put oven 'ocks where you wont them
[See page 5 for suggestions.)
2.
Set Oven Selector to BAKE.
3.
Set Oven Tennperature Control to ttie bak
ing temperature you want
4.
Let the oven preheat until the Signal Light
goes off.
5.
Put food n the oven
6
.
When dc ne baking, turn both knobs to
OFF
During baking, the elements will turn on
and oft to help hold the oven temperature at
the setting. (The top element will never turn
red, but will be hot.) The Signal Light will turn
on and off with the elements.
ADJUSTING THE OVEN TEMPERATURE CONTROLS
Does either oven seem to be hotter or colder than your old oven at the same
settings? The temperature setting in your old oven may have changed graduo' >
over the years The accurate setting of your new ovens can seem different if you
think either c' both oven temperatures need adjusting, follow these steps
Locking Screw
1.
Pull the Oven Tem
perature
Control
straight o1.
Loosen the lock
ing screw:
NOTICE position
of notches
3.
To lower the
temperature, move
a notch closer to LO
Each notch equals
about 10°F (5°C]
4.
To raise the
temperature, move
a notch deserto HI.
Each notch equals
about 10°F (5°C),
Tighten the locking screw. Replace the knob.
■ Tmk