Changing the bin door panel – Whirlpool EC5100XP User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To start the normal ioe making cycle, turn

the Cycle Control Knob to “ON."

To stop ice maker operation, turn Cycle

Control Knob to “OFF.”

The “OLEAN" setting is used whenever solutions
are circulated through the ice maker for clean

ing. Only the water pump operates at this
setting.

Changing the bin door panel

You can easily change the color of the front
panel on the storage bin door. Six colors are
available: Black, Almond, Flarvest Gold, White,
Toast and Platinum.

To change panel:

1. Open the storage bin door. Remove the

two screws on the top of the door, which
hold the handle.

Loosen the screws in both of the side trim

pieces.

Remove the handle and the handle

insert.

Carefully slide the panels out. You will find

three panels with six colors.

Choose the color you want to show and

carefully slide the panels back into the
door.

NOTE: Be careful not to scratch the

panels as they are inserted.

Replace the handle insert and tighten

the screws in both side trim pieces. Replace
the handle and the screws.

Note: You can make a decorative wood front to match existing cabinets. The panei shouid
be V4 (6 mm) thick and 17 x 11V4 (433 mm x 286 mm). Remove the coior panels and break oft
the ribs on the door insuiation to aliow for wood thickness.