Using dryer fabric softeners, Saving energy, Vacation care – Whirlpool 3401092 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

LAUNDRY TIPS
Using dryer fabric softeners
Dryer fabric softeners are recommended for • Remove fabric softener stains by wetting
reducing static cling and for softening the stains and rubbing them with liquid
fabrics. Always follow package instructions detergent or bar soap and rewash,
carefully. • some fabric softeners can clog the lint
• Put one fabric softener sheet on top of the screen and slow drying. Use fabric soften-
load before starting the
dryer. Do not add a fabric
softener sheet after the drying
cycle has started. Instant heat
can cause the fabric softener
ers labeled as dryer safe.
to spot fabrics.
Saving energy
• Use an Automatic cycle to dry most loads.
• Dry only full loads without overdrying.
• Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door
unnecessarily.
• Plan your laundry to dry one load after
another. A warm dryer shortens drying
time.
• Shorten drying times by exhausting dryer
properly and cleaning exhaust duct and
outside exhaust hood as needed.
-Keep the lint screen clean.
-Use your dryer in a room where room air
temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
Vacation care
1. Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
18