Whirlpool 3401092 - Manual (Page 11)

OPERATING YOUR DRYER
End of Cycle signal
(on some models)
The dryer sounds a signal to let you know
when the cycle is finished. The
signai is helpful when you are
drying permanent press,
synthetics, and other items
that should be removed from
the dryer as soon as it stops.
• On some dryers, the end of cycle signal is
not adjustable.
• On other dryers, the end of cycle signal
can be turned On or Off by a selector. The
end of cycle On/Off selector is part of the
Start Button on some models. The various
types of selectors are described in the
chart below.
Using End of Cycle signal and
FINISH GUARD® feature
(on some models)
If your dryer has the end of cycle signal
and/or FINISH GUARD feature, they may be
turned On or Off as shown below.
NOTE: Unless you turn Off the FINISH
GUARD feature, it operates at the end of
the cycle.
Your model may have one of the following:
• Separate knob selectors for end of cycle
signal and FINISH GUARD feature.
• CLEAN TOUCH™ pushbutton pad for
both features.
SETTING SEPARATE
KNOBS
OR
CLEAN TOUCH
SELECTOR
End of Cycle
Signal
OFF
Finish Guard
OFF
1=1 s o
□ □□□
Finish Guard Cycle Signal
End of Cycle
Signal
OFF
Finish Guard
ON
EndgtCyctoSIgntf
□ □□□
Finish Guard Cycle Signal
End of Cycle
Signal
ON
Finish Guard
OFF
End o( Cy«l» Stgnai
□ □□□
Finish Guard Cycle Signal
End of Cycle
Signal
ON
Finish Guard
ON
EndofCycIi Sl^wl
Push to Start
□ □□□
Finish Guard Cycle Signal
11