A caution, If dryer does not operate properly – Whirlpool 6LE5700XSW0 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If dryer does not

operate properly...

If dryer will not operate, check the following

to be sure that:
A. Electrical supply is connected.
B. House fuse is intact and tight or circuit

breaker has not tripped.

C. Door is closed.

D. Controls are set in a running or "On"

position.

E. Start button has been pushed firmly.

A CAUTION

Floor Damage

Slide dryer onto cardboard or hardboard
before moving across floor.
Failure to do so may cause damage to
floor covering.

When moving your dryer...

• Shut off electric supply to dryer.

• Disconnect power supply cord and tape

securely to dryer.

• Tape the drum to the front panel.

• Tape the dryer door and lint screen.
• Screw leveling legs all the way in.

Before having your electric dryer installed in
your new home, check with a licensed

electrician to confirm that the supply

voltage matches the voltage specified on
the serial/rating plate.

Part No. 3394023 Rev. A

doo

CORPORATION

Printed on recycled paper.

10% post consumer waste/

50% recovered materials.

Prepared by Whirlpool Corporation

Benton Harbor, Michigan 49022

Printed in U.S.A.