Before calling for assistance, If your washer does not fill, If your washer does not spin – Whirlpool LA558oXP User Manual

Page 13: If your washer stops during the, Permanent press cycle, If washer fills and drains, Without running, Make sure the drain hose is, Higher than the water level in, The washer. if it isn’t

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If you need service or assistance, we suggest

you follow these four steps:

1. Before calling for assistance.

Performance problems often re

sult from little things you can find
and fix yourself without tools of any
kind.

IF YOUR WASHER DOES NOT FILL:

• Is the power supply cord

plugged in?

•

• Are both wdter faucets open?

• Are fuses blown or circuit-breotcer

tripped?

• Are the water supply hoses

kinked?

• Is the Cycle Control Knob set and

pulled out?

IF YOUR WASHER DOES NOT SPIN;

• Is the lid closed?
• Is the power supply cord

plugged in?

• Is a fuse blown or circuit-breaker

tripped?

IF YOUR WASHER STOPS DURING THE

PERMANENT PRESS CYCLE:
• Remember, the wdsher will stop for

dbout 2 minutes after the partial

drain during the cool-down period

in this cycle.

IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:

• Make sure that the Cycle Control

Knob is pointing to a number in

the cycle.

MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN

THE WASHER. IF IT ISN’T...

• The washer may seem to be

draining during wash and rinse
cycles.

• Water can siphon out. (See "In

stallation Instructions.")