Installation instructions – Whirlpool LSR4311DQO User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Instructions

Tilt washer forward,

raising back legs l"off of

floor to adjust rear

self-leveling legs. Gently

lower washer to floor.

Check levelness of the

washer by placing a

carpenter's level on the

top of the washer, first

side to side; then front to back

If washer is not level,

screw the front legs up

or down to adjust and

repeat step 4.

Once the washer is level,

use wrench to turn nuts

on front legs up tightly

against washer base. If

nuts are not tight against

washer base, the washer

may vibrate.