Installation instructions – Whirlpool LSR4311DQO User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Instructions

Your demo model must be installed using the

following manual fill method.

Place the Unit into

position on the sales

floor, preferably on an

end cap next to a

Whirlpool 3-Speed

washer.

With pliers, remove the

yellow plug at the base

of the washer in the

back. The plug must be

completely removed for

the self-leveling legs to

be released.

Insert leveling legs into

correct holes at each

front corner of washer

until nuts touch

washer. Do not tighten

nuts until step 6.