Cleaning the dryer window, Awarning – Whirlpool LT7004XV User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lint Removal and Cleaning
Continued
Heat Inlet
duct
Electrical
supply
Clean lint gathered inside the dryer.
Lint can gather inside the dryer and
create a FIRE HAZARD. This lint
should be removed at least every
2 to 3 years, or more often,
depending on dryer usage.
AWARNING
Electrical Shock and
Personal Injury Hazard
• Unplug the power supply cord
or turn off the electrical power
before lint removal.
• Do not put hands inside the
cabinet.
• Make sure the dryer is cool.
• More than one person is
required to lift, tilt or move the
washer/dryer because of its
weight and size.
Failure to do so could result in
electrical shock, injury or
damage.
Cleaning shouid be done only by a
qualified person.
1. Unplug unit from electrical supply
or turn off electrical power.
2. Remove back panel from dryer.
3. Avoid touching wires and thermostats
4. Remove lint from boxed-in area with
a soft brush or vacuum cleaner.
5. Replace back panel, reconnect and
level the Thin Twin.
Cleaning the dryer window
Use spray glass cleaner and a soft
cloth when cleaning the window in the
dryer door.
• Make sure the dryer is cool.
• Follow directions provided with the
cleaner.
• Wash, rinse and dry well.
NOTE; See the Laundry Guide for
additional cleaning information.
20