To stop and restart the dryer – Whirlpool EL2020W User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G I N S T R U C T I O N S
3. Push the Start Button to start the dryer.
4. To stop and restart the dryer:
• Open the door or turn the Cycle Control Knob
to OFF to stop the dryer.
• Close the door, select a cycle (if necessary)
and push the Start Button to restart the dryer.
5. To change the cycle and/or time, turn the
Cycle Control Knob either way to point to a
new setting. The Cycle Control Knob should
point to an OFF area when the dryer is not in
use. If the dryer is stopped before the cycle is
finished turn the Cycle Control Knob to an
OFF area.
This manual is related to the following products: