Setting the clock, Do this, This happens – Whirlpool SM988PES User Manual
Page 9: Touch clock set, Touch start
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the clock
When the oven is first piugged in, a tone sounds and the dispiay shows 88
:
88
.
if the electric power ever goes off, the display will again show all 8’swhen the
power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display
will be blank after cooking.
DO THIS...
THIS HAPPENS...
1. Touch CLOCK SET.
The Display will show a "0"
and the colon will start to
flash. The first Number Pad
must be touched within
5 seconds or the Display
will go blank.
Touch
CLOCK SET again and
continue.
3
2
5
2.
Touch Number
Pads for the cor
rect time of day.
The Display will show what
numbers you touched in
the order you touched
them.
This example shows
3:25.
3.
Touch START.
The colon will stop flashing.
The Clock is set.
/_ / /
If you have touched in an
incorrect time, such as
12:65, "Err" will show on the
Display. Touch CLOCK SET
and start over.
NOTE: To reset the clock, touch CLOCK SET. The current time will show on
the Display and the colon will flash. Continue to set the clock as shown
above.