Starting your washer, Select water 2. temperatures, Load sizes and water levels – Whirlpool LA53OOXP User Manual

Page 4: Do not, Overload washer, Select a 1. load size select water, Temperatures

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting
your washer:

1. Measure and add detergent

2. Place sorted load in washer

3. Start washer

Select a

1. LOAD SIZE

Select WATER

TEMPERATURES

• Turn the knob to point at a setting

that describes the size ot load you

want to wash

• The water level can be set for

EX SMALL (d few items), MED or
LARGE (a full load).

NOTE: Use the LARGE water level
tor best permanent press results.

• Match the wash water temperature

to the type of fabrics and soils being
washed.

• All rinses are cold.

Recommended wash temperatures

can be found in your "Laundry Guide”.

IMPORTANT: Use warm water

with the PERM’T PRESS or

SHORT cycles. For heavily

soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely

in the water. Too big a load or too

little water can cause wear or

tearing of load items.

'Approximate

fill with load.

DO NOT

OVERLOAD WASHER.

LARGE (17.3 gals. 65.5 L)*

MED (13 4 gals. 50.8 L)*
EX SMALL (9.5 gals. 36 0 L)*