Changing the light bulbs, Removing the base grille – Whirlpool RT18HD User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R R E F R I G E R A T O R

Changing the light bulbs

^WARNING

Electrical Shock Hazard

Before removing a light bulb, either
unplug the refrigerator or disconnect the
electricity leading to the refrigerator at

the main power supply.

Failure to do so could result in electrical
shock or personal injury.

To change the refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Panel to remove

bulb.

3. Replace with a 40-watt appliance bulb.

4. Reconnect refrigerator to power supply.

NOTE:

Not all commercial appliance bulbs will

fit your refrigerator. Be sure to replace a bulb
with one of the same size and shape.

Removing the base grille

To remove the grille:

1. Open refrigerator door.

2. Pull base grille forward to release the

support tabs from the metal clips.

Do not remove Tech Sheet

fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close refrigerator door.

See cleaning instructions for defrost pan and
condenser coils on page 18.

Condenser coils