Restarting your washer, Using selections together, Using your washer – Whirlpool LA980OXK User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Restarting your
Washer
If you stop your washer by touchi
ng HOLD, you can restart it by touching
RUN, The washer "rennembers" and
starts from w'here it stopped
However, if you stop your vsasher
by moving the switch to POWER OFF,
every selection is canceled. They are
also canceled if a blown fuse or power
interruption stops the washer.
The w-ay you restart the washer
depends on what the washer was doing
when it stopped.
Filling for (or beginning of) the
wash cycle:
• Move switch to POWER ON
• Touch FABRIC Selector and options
• The washer will finish filling
[if needed) and wash according to the
new selections.
End of the wash cycle:
• Move switch to POWER ON
• Touch SPIN ONLY to dram and spin
• After the washer stops, again move
switch to POWER ON,
• Touch RINSE SPIN to till, rinse, dram
and spin the load
Filling for (or beginning of) the rinse
cycle:
• Move switch to POWER ON
• Touch RINSE SPIN to finish filling or to
finish the rinsing cycle.
Using Selections
Together
Your washer has Electronic Oon-
trols that let many selections work
together for the kind of wash you want.
There are many possible combi
nations of selections,,,so many that
there isn't room to tell about each com
bination possible.
The indicator lights will tell you
what you need to know. If the indicator
ight glows when you touch a selector,
the Electronic Controls accept the
selection. If it does not glow, the Elec
tronic Controls reject the selection
1,
The indicator iight will glow and stay
glowing.
When this happens, your
selection has been accepted. The
washer will use that selection or
option while it is operating,
2,
The indicator iight will glow, but
another will go off.
This means that
your second selection cancelled the
first. For example, if you touched
REG HEAVY and decide you want
PERM'T PRESS, just touch PERM'T
PRESS, The REG. HEAVY Selection Is
cancelled and its indicator light
goes off,
3,
The indicator light will not glow.
The
Electronic Controls are designed
to reject any option that shouldn't be
used for the wash you selected. Eor
example, if you touched KNITS
GENTLE, you won't be able to gel irie
HOT WASH indicator light to glow
Pages 8 through 13 of this
Use
& Care Guide
tell what happens during
©och s©!©ctiori For ©C3ch scicctior'i
there are details on which can and
can't be used together.