Starting your washer, Starting your yfasher, Select cycle and wash time; 1. start the washer – Whirlpool LA3800XM User Manual
Page 4: Wtiiflpool
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent.
i//y/ 2. Place sorted load In washer.
3. Start washer.
WTiiflpool
3
CYCLE
Select CYCLE and WASH TIME;
1. Start the washer
A.
Push in the Control Knob and
turn it to the right. It must be pushed
in and turned only clockwise.
). Stop on a number in the cycle
you want. The numbers are minutes of
wash time. The drawing shows 8
minutes otagitation in the REGULAR
HEAVY Cycle. NOTE: In the REGULAR
HEAVY and SHORT Cycles, the washer
will fill only when the knob points to a
"fill" area.
C.
start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the selected
number of minutes.
D.
Tostopthe washer at any time,
push in the Control Knob. To restart
the washer, pull out the Control Knob.
To set the controls for
a
rinse and spin (second rinse), a drain and
spin, or a soak or pre-wash, see page 8.