Whirlpool 980 - Manual (Page 17)

Use a delayed start to run the dishwasher
during off-peak hours to reduce energy
usage or to reduce daytime heat buildup in
your home.
1. Close door firmly until it latches.
2-hour delay start, twice for 4
hours, or three times for 6
hours. The indicator will glow.
Press a Cycle. The Delay Start count­
down begins when you press
the Cycle pad. If you don’t
press a Cycle pad within 30
seconds, the Delay Hours
indicator turns off.
4. If desired, press one or more Option
pads.
The Delay Hours indicator
stays on until the wash cycle
begins.
To cancel delay and start the
dishwasher:
1. Press Delay Hours until the 6 glows.
2. Press Delay Hours one
more time. The delayed cycle
starts.
To cancel delay and cycle:
1. Press Cancel/Drain. The Delay Hours
indicator will turn off.
2. Press new Cycle and Option
pads.
NOTE: You can add items to the load any­
time during the delay countdown. After
adding items, close the door firmly until it
latches. The delay countdown will not con­
tinue if the door is not latched.
17