beautypg.com

To clear the indicators, Power scour™ feature, San i rinse™ option – Whirlpool 980 User Manual

Page 15: Air dry

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Press Cancel/Drain to cancel a cycle or

clear option selections.

To cancel a cycle:

• Press Cancel/Drain while the dishwasher

is running to start a 2-minute drain. It will

take a few seconds for the drain to start. If

desired, select a new cycle. (See the

“Changing a cycle or option” section.)

• You can press Cancel/Drain again to stop

the drain immediately. Remember to drain

the dishwasher again before starting a

new cycle.

NOTE:

A small amount of water remaining

in the dishwasher is normal.

To clear the indicators:

Press Cancel/Drain before starting the

dishwasher to clear all cycle and option

selections.

You can press an Option after the

dishwasher starts as long as the cycle is

not past the point that the option is used.

For example, you can press Air Dry any

time before the Drying indicator glows.

After a wash cycle, the dishwasher remem­

bers the options used and uses the same

options in the next wash cycle unless new

options are selected or the Cancel/Drain

pad is pressed.

POWER SCOUR™ feature

When POWER SCOUR is selected the dish­

washer adds heat and water

during several portions of the

Normal, Heavy, and Pots-N-

Pans cycles. The extra heat

and water improve washing

results. The cycle will be longer when you

select the POWER SCOUR feature. The

Pots-N-Pans

cycle,

with

POWER

SCOUR

is recommended for baked-on soil.

SANI

RINSE

SAN I RINSE™ option

Selecting the SAN I RINSE option raises the

water temperature in the final

rinse to 155°F (68°C).

SAN I RINSE is an option with

________ the Pots-N-Pans, Heavy, Normal

and Low Energy cycles. Depending on the

incoming temperature of your water, cycle

times might be longer when you select

SAN I RINSE.

NOTE:

SAN I RINSE raises the temperature

of the final rinse to 155°F

(68°C),

and main­

tains that temperature 9 minutes. This high

temperature rinse sanitizes your dishes and

glassware.

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during

the “dry” portion of a cycle. Using

Air Dry helps save energy, but

dishes take longer to dry and

some spotting can occur. Some items (such

as plastics) may need towel drying. For best

drying, use a liquid rinse agent.

NOTE:

The dishwasher automatically heats

the air in the dishwasher during the “dry”

portion of the cycle unless you select Air Dry.

15