Broiling, Position racks before turning on the oven, Baking or roasting – Whirlpool RB260PXK User Manual
Page 5: Oven rack positions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BROILING
1. Place the rack where you
want it for broiling. (See
beiow for suggestions.)
2. Put broiler pan and food
on the rack.
3. Set Oven Selector to
BROIL.
4. Set Oven Tennperature
Control to BROIL (Set on a
lower temperature for
slower broiling. See
below.)
5. During broiling the oven
door must be partly open
A bullt-ln stop will hold it
there.
When broiling is done,
turn both knobs to OFF.
Broiling can be slowed by setting the Oven Temperature Control to a setting
lower than BROIL. When it's on BROIL, the broil element is on all the time. When it’s
on a temperature, the element turns off and on. The lower the temperature setting,
the shorter are the times when the element is on.
The Oven Selector must be on BROIL and the door partly
open for all broiling temperatures.
OVEN RACK POSITIONS
Position racks before turning on the oven.
Broil Element
Lift rack at
front and
pull out.
BAKING OR ROASTING
Food for baking or roasting should be
placed in the center of the oven.
Always leave at least 1 to 2 inches
(4-5 cm) between the sides of a pan and fhe
oven wall and another pan. For more informa
tion, see the "Cooking Guide."
BROILING
Adjust the top rook so the food to be broiled
is at a suggested distance from the broil ele
ment. (See page 6.) ALWAYS broil with the
door open to the broil-stop.